|
|
Embedded System for Water Level Monitoring
Hanák, Jiří ; Kašpárek, Tomáš (referee) ; Šimek, Václav (advisor)
This work is dealing with the design and implementation of an embedded water level monitoring system. The purpose of the system is to control the filling of a tank based on the water level. First of all, the attention is given to the survey of existing measurement techniques and selection of the appropriate sensing elements for a given scenario. In fact, the embedded system is using TFmini and JSN-SR04T-2.0 contactless sensors. The system is controlled by STM32F0 microcontroller from STMicroelectronics programmed in C using HAL abstraction layer. The measured results are sent via Wi-Fi SoC ESP8266EX to the Python server that is used for processing and demonstratiton purposes.
|
|
|
Analysis of structures of compact hydraulic equipment
Sordyl, Martin ; Pokorný, Jan (referee) ; Pokorný, Přemysl (advisor)
The subject of this thesis is realization of short research of current compact hydraulic power unit, realization of FEM analysis with aim to find inappropriately dimensioned parts of structures. Based on this data design optimized solution of structures and create drawings of weldments. This thesis is carried out in cooperation with company Bosch Rexroth, spol.s.r.o.
|
|
|
REINFORCED CONCRETE TANK
Beran, Jakub ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
The aim of the bachelor thesis is a static design of an reinforcement tank. The internal forces are calculated by FEM programme Scia Engineer 16.1 with a SOILIN modul interacting with a subsoil model. The internal forces are verified by a manual calculation. The load-bearing elements are designed with these forces. The structural assessment report is designed to ultimate limit state and service limite state – service limit state of crack. Another report considers ground water occurring. The static report deals with different time of concreting foundation slab and walls. This is the reason why shrinkage is very important for internal forces and their values. The objective of the project is to design the tank without cracks in concrete. The limit width of cracks is wk= 0,3 mm by EC 1992-1-1.
|
|
|
Stables with Milking House
Lenoch, Petr ; Hovořák, Dalibor (referee) ; Hlavačka, Tomáš (advisor)
Master’s thesis deals with a project documentation of a farming building. It is situated in agrarian farm in Horní Kalná in Královehradecký kraj. There will be 340 cows. Stable will be connect with milking house by connecting tunnel. Head mission is with simply solving and with useing high technology create very good conditions for stay of animals (welfare).
|
|
|
Assessment and Optimization of the Water Distribution Network
Bakrlík, Marek ; Netušil, Lukáš (referee) ; Kučera, Tomáš (advisor)
The subject of this dissertation is the assessment and optimization of water distribution in the group water supply. The water supply networks are located in the Water Association of Babicko, former district of Uherské Hradiště, region of Zlín. The objective of this work is the unification of the entire documentation for all projects, creation of a hydraulic model of water supply network and subsequent verification of the existing capacities and pressure ratios. This work is particularly focused on the evaluation of pressure ratios at the highest and the lowest points of villages, whether they correspond to the legal limits, and subsequent design of a possible division to pressure zones.
|
|
|
REINFORCED CONCRETE CYLINDRICAL TANK
Chumová, Petra ; Podroužková, Božena (referee) ; Šulák, Pavel (advisor)
The Bachelor´s thesis focuses on a static solution of reinforced concrete cylindrical tank. The thesis comprises dimensioning of the bottom of the tank and its walls to selected load cases and processing a drawing documentation. The calculation of internal forces is done using the software Scia Engineer. The validation of results is performed by hand calculation using differential equations on a simplified model for the results of internal forces in the wall of the tank.
|
|
|
The Analysis of Water Distribution Network of Vysoká nad Labem Municipality
Bakrlík, Marek ; Netušil, Lukáš (referee) ; Kučera, Tomáš (advisor)
The goal of my bachelor’s thesis is to assess the current supply system of drinking water in the village Vysoká nad Labem. The growth of the village has been the cause of the increasing consumption of drinking water. Due to the increase in water withdrawals the pressure conditions in the supply network has been also changed and has been struggling with the legal limits. Particularly the paper will focus on an evaluation of the pressure ratios at the highest point of the village followed by the design of a possible division to the pressure zones due to the potential supply by several sources.
|
|
|
Identification of forces in the transport of liquids
Štursa, Martin ; Pokorný, Přemysl (referee) ; Kubín, Martin (advisor)
This bachelor’s thesis deals with transport of liquids on the roads. In the first part of the thesis, tanks are divided by construction, then the problem of transporting of liquids by European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) is analysed. In the second part of the thesis, maximal speeds for a vehicle transporting a liquid during cornering are defined and calculated. These calculations are then applied in the solution of a real-life example.
|
|
|
Design of reinforced concrete cylindric tank
Svobodová, Barbora ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
The bachelor's thesis deals with static analysis of a reinforced concrete cylindrical tank. The analysis includes load calculation for selected load cases and design of tank wall and bottom reinforcement. Load combinations and load effects were calculated using the Axis VM software. The thesis includes shape drawing documentation, as well as drawing documentation of bottom and wall reinforcement.
|
|
|
Design of the circle concrete tank
Šimek, Ondřej ; Chalabala, Jiří (referee) ; Klusáček, Ladislav (advisor)
The diploma‘s thesis deals with the design and assessment of prestressed cocrete tank of biogas station at ultimate limit state and also at serviceability limit state, according to ČSN EN 1992-1-1: Design of concrete structures. Specifically, the design of wall of the tank and foundation slab. The text part contains general information on the desing of the structure, static idealization of the structure, type of load and method for calculation of inner forces. Attachments contain drawing documentation and structural analysis, which completes the text part and solves in detail said structure.
|
guest ::
